FAQ About SPHD Steel
Is SPHD hot rolled or cold rolled?
SPHD——Indicates hot-rolled steel sheets and strips for stamping. It is suitable for the manufacture of parts that need to be cold-formed, such as electrical cabinets, jack shells, refrigerator compressor shells, and automobile wheels.
What is the meaning of the grade of SPHD?
SPHC—the first S is the abbreviation of Steel; P is the abbreviation of Plate; H is the abbreviation of Heat; C——Commercial is for general (commercial use); D——Drawing is for stamping. The whole refers to hot-rolled steel sheets and strips for stamping.
What are the standards for SPHD?
Comparison table of similar grades:
|Q/BQB302-2003||DIN1614-2-86||EN111-77||EN10111-1998||JIS G3131-1996||GB 710-91/ GB 711-88|
|SPHD||StW23||FeP12||DD12||SPHD||08 or 08A1|
What are the chemical components of SPHD?
SPHD hot-rolled steel sheets contain chemical elements such as carbon, silicon, manganese, phosphorus, sulfur, aluminum, etc. Manufacturers will add appropriate ingredients according to the following standards:
Carbon (C): less than 0.10%
Silicon (si): less than 0.05%
Manganese (Mn): less than 0.50%
Phosphorus (P): less than 0.035%
Sulfur (S): less than 0.035%
Aluminum (AL): greater than 0.010%
What are the mechanical properties of SPHD?
Yield strength: The yield strength of SPHD steel plate is 255-345MPa, which is the highest value of yield strength among all brands of hot-rolled carbon structural steel. The yield strength of ordinary carbon structural steel (such as Q235) is between 185 and 275 MPa.
Tensile strength: The tensile strength of SPHD steel plate is 340-470MPa.
Elongation: SPHD steel plate has good elongation performance. The minimum elongation of SPHD steel plate is 22%.
As a stamped hot-rolled steel plate, SPHD steel plate has good welding performance and formability.
SPHD steel plate has good mechanical properties. The tensile strength is 340-470MPa, and the yield strength is 255-345MPa. This material can be welded using all traditional methods.
What are the physical properties of SPHD?
Density: 7.85 g/cm3
Melting point: 1420-1460°C
Hardness: The hardness of SPHD steel plate is determined by the heat treatment process of the steel plate. Hardness can vary depending on the desired properties required for the final product. However, in general, SPHD steel is much harder than other types of steel due to its higher carbon content.
What are the available sizes of SPHD steel plates?
SPHD hot rolled steel plates are available in a variety of sizes to suit a variety of applications. The most common size is 2,000mm x 1,200mm, but other sizes are also available upon request.
The thickness of SPHD hot rolled steel plate also varies from 3mm to 100mm. The thickness of the steel plate will determine the overall strength and durability of the finished product.
What are the characteristics of SPHD steel plate?
SPHD hot rolled pickling plate
The SPHD pickling plate is made of high-quality hot-rolled coil as raw material. It is made of black iron sheet or steel plate, and then the steel oxide scale on the surface is removed by pickling by the pickling unit. In this way, the surface quality of the SPHD pickling plate is improved. The smoothness is greatly improved, and the steel looks more beautiful.
In addition, SPHD steel plate also has the following excellent features:
*Easy to form
*Good dimensional accuracy
* Good mechanical properties
What are the example applications of SPHD steel plates?
SPHD hot rolled pickled sheet is used in a wide variety of applications ranging from construction and building cladding to automotive body panels. Their excellent corrosion resistance and durability make them ideal for a variety of projects. The following are just a few of the many applications for hot rolled pickled sheet:
Construction: Commonly used as cladding for buildings and other structures. They provide an elegant look while still offering protection from the elements.
– Automotive: Commonly used in parts such as body panels in the automotive industry. Their excellent corrosion resistance and durability make them ideal for such applications.
– Marine: Can be used in marine applications such as hulls and decks. Their excellent corrosion resistance makes them ideal for this environment.
There are also many potential applications for SPHD hot-rolled steel sheets. Some examples include:
– Structural components
– Agricultural equipment
– storage tank
SPHD steel plate has good formability and weldability, making it ideal for a variety of applications. Its high strength and low carbon content make it suitable for a variety of industries.
What is the difference between SPHD steel plate and SPHC steel plate?
SPHD steel plate is a hot-rolled low-carbon steel plate with good mechanical properties and low carbon content. The chemical composition of SPHD steel is similar to SPHC steel except for the carbon content. The difference in carbon content between SPHC and SPHD steels affects weldability and the mechanical properties of the finished product. The tensile strength, yield strength, elongation and impact toughness of SPHD steel are lower than those of SPHC steel. The weldability of SPHD steel is slightly lower than that of SPHC steel.