图片3

Titanium alloy TA8-1 (Ti-0.05Pd) is an alloy with good physical/mechanical properties and corrosion resistance. It is similar in performance to TA9-1, with the main difference being the palladium content. The presence of palladium helps improve the corrosion resistance of the alloy. TA8-1 has good formability and is easy to weld. It exhibits very good corrosion resistance in highly oxidizing and mildly reducing environments. This material is suitable for castable applications such as valves and fittings.

Chemical composition of titanium alloy TA8-1 (%)

Fe

C

N

H

O

Pd

Other individual

Other total

Ti

≦0.2

≦0.08

≦0.03

≦0.015

≦0.18

0.04-0.08

≦0.1.

≦0.4

margin

Physical properties of titanium alloy TA8-1

tensile strength

345  Mpa

Yield Strength

220   Mpa

Poisson’s ratio

0.34-0.40

Elastic Modulus

103   Gpa

Elongation at 50 mm (A5)

28%

Hardness(HV)

115

Welding of titanium alloy TA8-1

For the welding of titanium alloy TA8-1, it has good weldability. Because it is a single-phase material, its microstructure is not affected by heat treatment or welding temperatures. This makes the welding process relatively simple and does not adversely affect the properties of the material. So you can safely carry out the welding process of TA8-1 alloy.

Annealing of titanium alloy TA8-1

The annealing process of titanium alloy TA8-1 can be carried out through the following steps:

Heat to 650-760°C (1202-1400°F) and hold for 6 minutes to 2 hours.

Then air cooling is carried out, that is, the material is exposed to the natural environment and allowed to gradually cool down.

If you need to relieve stress, you can do the following:

Heat to 480-595°C (896-1103°F) and hold for 15 minutes to 4 hours.

Then carry out air cooling.

The annealing process can help restore the material’s grain structure and reduce stress. Remember to strictly control the heating and cooling speeds according to specific conditions and requirements.

Application of titanium alloy TA8-1

Titanium alloy TA8-1 is widely used in many fields. Here are some common application areas:

Chemical industry: Due to its excellent corrosion resistance, TA8-1 alloy is used in the chemical industry to manufacture reactors, heat exchangers and piping systems to withstand the corrosion and pressure of various chemical substances.

Marine industry: Due to its ability to resist seawater corrosion, TA8-1 alloy is widely used in the marine industry, such as offshore oil drilling platforms, ship hulls and ship accessories.

Aerospace industry: Due to its good strength to weight ratio, titanium alloy TA8-1 is often used in the aerospace field, such as aircraft fuselage structures, engine parts and parts in flight control systems.

Medical field: TA8-1 alloy is biocompatible and is widely used in medical fields such as medical devices, artificial joints, and dental implants.

In short, titanium alloy TA8-1, as an important corrosion-resistant titanium alloy, plays an important role in the chemical industry, marine industry, aerospace industry and medical fields.